The ESSMANN gully classic series provides a fixed flange design with standard roof sheeting prepared at the factory. Various types of standard roof sheeting can be connected uniformly, depending on the version.
ESSMANN gullies classic, vertical version
are available in standard sizes DN 70, 100, 125 and 150* (*DN 125 with transition pipe), with DN 150 also available as a special model. The gullies can be designed in unheated and heated versions, with the latter featuring a 230 V resistance heater.
All gully bodies are made of extremely impact-resistant polypropylene (PP) and are double walled for heat insulation. To exclude the possibility of backflow in accordance with DIN, the upper section of the inlet cup contains a groove into which a roll ring is inserted when an extension unit is attached. Fixing the roll ring into the groove ensures that the seal cannot slip out of position. |
|
 |
|
|
ESSMANN gullies classic, angled version
are available in standard sizes DN 70, 100 and 125* (*DN 100 with transition pipe). The gullies can be designed in unheated and heated versions, with the latter featuring a 230 V resistance heater.
All gully bodies are made of extremely impact-resistant polypropylene (PP) and are double walled for heat insulation. To exclude the possibility of backflow in accordance with DIN, the upper section of the inlet cup contains a groove into which a roll ring is inserted when an extension unit is attached. Fixing the roll ring into the groove ensures that the seal cannot slip out of position. |
|
 |
|
|
ESSMANN roof and balcony gullies classic
are manufactured in an angled version, in the nominal sizes DN 50/DN 70* (*transition pipe on DN 50/70). The external heat insulating layer, made of rigid polystyrene foam, can be removed if required in order to achieve a particularly low installation height. The roof and balcony gully can be combined with extension units, a terrace gully attachment or a clamping ring.
The gully body is made of extremely impact-resistant polypropylene (PP). To exclude the possibility of backflow in accordance with DIN, the upper section of the inlet cup contains a groove into which a roll ring is inserted when an extension unit is attached. Fixing the roll ring into the groove ensures that the seal cannot slip out of position. |
|
 |
|
|
ESSMANN gully classic extension units
are available for heat insulation 120 mm, 160 mm and up to 220 mm thick. This applies to all gullies except for vertical size DN 150. A special extension unit with heat insulation up to 220 mm thick is available for this type of gully.
The gully body and its flange are designed in such a way that roof sheeting can be connected to them directly and uniformly.
When attaching an extension, the roll ring supplied is inserted into the groove in the gully base body and the extension unit pressed in using lubricant. |
|
 |
|
|
ESSMANN vari-level gullies classic
are available in standard sizes DN 70 and 100. Includes pebble trap and graduated nozzle for two nominal widths. All gully bodies are made of extremely impact-resistant polypropylene (PP). To exclude the possibility of backflow in accordance with DIN, the upper section of the inlet cup contains a groove into which a roll ring is inserted when an extension unit is attached. Fixing the roll ring into the groove ensures that the seal cannot slip out of position.
|
|
 |
|
|
ESSMANN clamping ring classic
can be used for high polymer roof sheeting up to 3 mm thick in existing ESSMANN roof gullies or extension units of sizes up to DN 125, versions with a bitumen or a PVC connection. The clamping ring is used together with a roll ring to clamp the roof sheeting into the groove in the gully body. |
|
 |
|
|
