|
|
|
ESSMANN balcony gullies classic type A, vertical version
These balcony gullies are manufactured in nominal sizes DN 50 and DN 70 in a vertical design. The vertical balcony gully is graduated for two nominal widths (DN 50/70). These balcony gullies can be combined with different extension units for heat insulation up to 110 mm or 200 mm thick. |
|
 |
|
|
ESSMANN balcony gullies classic type A, angled version
These balcony gullies are manufactured in nominal sizes DN 50 and DN 70 in an angled design. They can be combined with different extension units for heat insulation up to 110 mm or 200 mm thick. |
|
 |
|
|
ESSMANN balcony gullies classic type B, vertical version
These balcony gullies are manufactured in nominal sizes DN 50 and DN 70 in a vertical design. Balcony gullies of nominal size DN 70 can be combined with different extension units for heat insulation up to 110 mm or 200 mm thick. |
|
 |
|
|
ESSMANN balcony gully classic extension unit for heat insulation up to 200 mm
For balcony gully type A DN 50 and 70 and for balcony gully type B DN 70, including pebble trap and lip seal. |
|
 |
|
|
ESSMANN balcony gully attachments
with a stainless steel sieve plate are only used with ESSMANN balcony gullies. The balcony gully attachment is placed on the small pebble trap for lateral mounting. The attachment must be cut to the required length by the customer and can be used with or without an odour barrier. |
|
 |
|
|
ESSMANN terrace gully attachments
with a stainless steel sieve plate are used in ESSMANN roof gullies classic and roof gullies with screw flange. If used in conjunction with the ESSMANN balcony gully, the terrace gully attachment is placed on the small pebble trap. A height adjustment ring facilitates infinite adjustment between 25 mm and 125 mm. The height adjustment ring features water drainage slots for draining the lower level. |
|
 |
|
|
ESSMANN balcony gullies with screw flange, vertical version
are manufactured in nominal sizes DN 50 and DN 70. The vertical balcony gully is graduated for two nominal widths (DN 50/70). These balcony gullies can be combined with an extension unit for heat insulation up to 110 mm thick, a terrace gully attachment or a balcony gully attachment. The gully body is made of extremely impact-resistant polypropylene (PP). |
|
 |
|
|
ESSMANN balcony gullies with screw flange, angled version
are manufactured in nominal sizes DN 50 and DN 70. The vertical balcony gully is graduated for two nominal widths (DN 50/70). These balcony gullies can be combined with an extension unit for heat insulation up to 110 mm thick, a terrace gully attachment or a balcony gully attachment. The gully body is made of extremely impact-resistant polypropylene (PP). |
|
 |
|
|
ESSMANN balcony gully with screw flange extension units for 110 mm heat insulation
for DN 50 balcony gullies.
|
|
 |
|
|
|
